From CAD to hand in 24–72 hours.
Functional prototypes for product designers, engineers, and inventors. Iterate in plastic before committing to tooling, machining, or moulds.
- STL / STEP / 3MF
- FDM
- Tolerance ~0.1mm
- Same-day quotes
Made in layers.
An industrial design studio in Cyprus for prototypes, custom parts, and small-batch production — we treat every print as a finished object, not a test piece.
What we do best
§ 02 — Capabilities
Four things, done properly.
Replace what you can’t buy anymore.
Discontinued knobs, mounts, brackets, housings, jigs. Send a sketch, a broken original, or a photo with measurements — we’ll model and print it.
- Reverse engineering
- Functional fits
- One-off & spare runs
- Marine / outdoor grade
10 to 1,000 units, packed and ready.
Bridge production for products too small for injection moulding. Consistent quality across the run, with hand-finishing and assembly on request.
- Multi-printer batches
- Post-processing
- Assembly & QC
- Packaging options
Don’t have a model? We’ll make one.
Full industrial design service — concept sketches, CAD modelling, design-for-manufacture refinement. Bring an idea, leave with a printable file and a finished object.
- Concept — CAD — Print
- DFM consulting
- Mechanical design
- Aesthetic refinement
§ 03 — Process
Built up, one layer at a time.
Brief
Send a file, a sketch, or a description. We reply with a quote, lead time, and material recommendation — usually same day.
Design
If you don’t have a model, we build one. If you do, we check it for printability and fix it — no surprises mid-print.
Calibrated machines, monitored prints, the right material for the job. We don’t ship anything we wouldn’t keep.
Finish
Support removal, sanding, painting, threaded inserts, assembly — whatever the part needs to be a finished object.
§ 04 — Materials
The right plastic for the actual job.
| Material | Typical use | Finish |
|---|---|---|
| PLA FDM · 0.1–0.3mm | Visual prototypes, display models, jigs, low-stress parts. | Matte / Silk |
| PETG FDM · impact + UV | Functional parts, brackets, enclosures, anything outdoors. | Semi-gloss |
| ABS / ASA FDM · heat resistant | Automotive, electrical housings, parts that see real heat. | Smoothable |
| TPU FDM · flexible | Gaskets, grips, dampers, phone cases, soft-touch parts. | Rubbery |
| Nylon (PA-CF) FDM · carbon-filled | Tooling, structural brackets, drone parts, end-use mechanical. | Matte / black |
§ 05 — Machines
A 3D printing farm, run by designers.
Maximum build volume
370×370×370
millimetres
Single-piece prints up to ~50 litres in volume — and a fleet of FDM machines running in parallel, so batches ship sooner without compromising on calibration.
| Tier | Build volume | Typical use |
|---|---|---|
| Compact FDM · fast cycle | up to 220 × 220 × 250 mm | Small parts, fast prototypes, jigs & fixtures. |
| Standard FDM · workhorse | up to 256 × 256 × 256 mm | Most prototyping & production parts. The everyday fleet. |
| Large format FDM · single-piece | 370 × 370 × 370 mm | Enclosures, props, big single-piece prints, batch jigs. |
§ 06 — Studio
An industrial design studio.
3dprinting.cy is an industrial design studio in Larnaca, born of INUX3D — the additive manufacturing know-how we’ve been building, breaking, and refining in Cyprus since 2016. We bring industrial design, additive manufacturing, and engineering under one roof: the same team that models your part in CAD also calibrates the machines, tunes the slicer, and finishes the object by hand.
Every brief gets a designer’s eye on the file before it hits the build plate, and every part leaves looking like a finished object rather than a test piece.
If you’re a product designer, an architect needing models, an engineer needing a jig, or a maker bridging to production — you’re who this studio is for.
— The studio